AQUABLEND –DS Descaling Chemical

AQUABLEND-DS is designed to remove the scaling& corrosion products from boiler& cooling water circuits , heat changers etc. It is a liquid formulation to remove hardness & low concentrated silica scales that can be removed offline by circulating its dilute solution of the chemical. It is a balance formulation of Hydrochloric Acid, Dispersant Wetting Agents & Corrosion Inhibitor.

BENEFITS

POWERFUL DESCALENT

AQUABLEND-DS is safe & non-corrosive for descaling ,it dissolves hardness scales quickly & completely.

SAFE FOR METALS

AQUABLEND-DS contains a synthetic polymeric corrosion inhibitor which forms protective film on the parent metal surface to prevent acid attack .

DETERGENT ACTION

AQUABLEND-DS contains a wetting agent which emulsifies oil grease present in the deposits. The detergent action of Aquablend-DS loosens dirt, silt, algae etc which can be removed during water flushing.

APPLICATION

AQUABLEND- DS should be dosed in 5-10 % solution in water . warm water may be used for faster action . normally the quantity of scale required depends upon the operating condition quantity of scales and hold up ,We will provide technical assistance to setup optimum dosage according to operating conditions and system.

STORAGE & HANDLING

AQUABLEND-DS should be stored in an air tight container away from direct heat. Always store at cool & dry place.. Wash thoroughly with water in case of contact. Do not swallow.

AQUABLEND-DS is available in 35 Kg. HDPE CARBOY.