AQUABLEND-70 is designed to remove the greese, dust & particles which are left out in the tube & drum during boiler installation or repairs. It is a liquid formulation to remove stubborn oil & grease deposits as well as stubborn mud & welding deposits . It is a balance formulation of surfactants , Dispersant Wetting Agents & Corrosion Inhibitor. It forms an magnetite anti corrosive layer on the metal surface in boiler tubes hence providing protection to the bare new tubes.
AQUABLEND-70 is safe & non-corrosive for boilout for boilers ,it dissolves oil grease as well as mud and other deposits left out during boiler manufacturing or repair quickly & complectly.
AQUABLEND-70 contains a synthetic polymeric corrosion inhibitor which forms protective film on the parent metal surface.
AQUABLEND-70 contains a wetting agent which emulsifies oil grease present in the deposits. The detergent action of Aquablend-70 loosens dirt ,silt,algae etc which can be removed during water flushing.
AQUABLEND- 70 should be dosed in 8-10 % solution in water . Aqua Management will provide technical assistance to setup optimum dosage according to operating conditions and system.
AQUABLEND-70 should be stored in an air tight container away from direct heat. Always store at cool & dry place.. Wash thoroughly with water in case of contact. Do not swallow.
AQUABLEND-70 is available in 20 Kg. HDPE CARBOY.