AQUABLEND –310 Oxygen Scavenger For Boiler Water Treatment

AQUABLEND-310 is used to remove the last traces of dissolved oxygen from boiler feed water. It is a liquid formulation of catalyzed sodium sulphite.It reacts with oxygen to produce sodium sulphates. The reaction is as below….

BENEFITS

RAPID REACTION

The catalyst in AQUABLEND-310 speed up the reaction of removal of dissolved oxygen,which finally helps in stopping oxygen related corrosion in the boiler

PH CONTROL

AQUABLEND-310 a liquid formulation to get proper ph control for optimum availability of catalyst for rapid oxygen removal

EASY TO HANDLE

AQUABLEND-310 is non- toxic and non-corrosive liquid formulation and therefore can be handled easily.

COST EFFECTIVE

Because of the presence of the catalyst in AQUABLEND-310 to speed up the reaction of removal of dissolved oxygen, excess quantity of sulphite can be reduced .hence it is also cost effective treatment.

APPLICATION

AQUABLEND-310 should be dosed continuously. Dose the dilute solution in boiler feed water line. Aqua – Management will provide technical assistance to set up optimum dosages according to your operating conditions. and available dosing system in your plant.

DOSAGE

About 12 PPM of AQUABLEND-310 is required to remove 1 ppm of oxygen from boiler feed water. About 25 % excess should be dosed to provide oxygen consuming reserve.

STORAGE & HANDLING

AQUABLEND-310 should be stored in an air tight container away from direct heat. Always store at cool & dry place.AQUABLEND-310 is strong reducing agent.handle using goggles & do not breathe in the vapours. Wash thoroughly in case of contact. Do not swallow.

AQUABLEND-310 is available in 20 Kg. carboys.